Throttle Actuators - Heavy Duty

All actuators feature an enclosed pancake servomotor and an internally mounted potentiometer, which provides instantaneous feedback of the throttle shaft position. This precision potentiometer is directly coupled to the output shaft, ensuring consistent accuracy. These units are simple, compact, rugged and designed for ease of installation.

Servo Position Actuators

SP31 Compact Actuator (31 in lb.)
  • Overload clutch
     
  • Variable arm and support bar
     
  • 3 radius cable drum (Cable actuated throttle)
     
  • Wide open position adjust potentiometer (on actuator) requires cable addition

SP80 Compact Actuator (80 in lb.)
  • Overload clutch
     
  • Variable arm and support bar
     
  • 3 radius cable drum (Cable actuated throttle)
     
  • Wide open position adjust potentiometer (on actuator) requires cable addition

Throttle Actuators

Actuator Throttle Actuator

Heavy Duty Actuators

Our custom applied heavy duty actuators are for speciality purposes and can eliminate or reduce exposure dangers within the test cell. AEI offers a Duff Norton Actuator for the tilting mechanism for its Horizontal/Vertical test stand hence reducing the effort of tilting the dynamometer box.

Amplifiers 

Standard 8551 Amplifier
  • Unit available in the aluminum enclosure for console mounting· Power Input  115/230 volt, 60 Hz, 1 Ph·  Signal Input 0-10VDC  Optional 4-20ma or 0-5Vdc· Amphenol Plugs for control and actuator(Mating connection included)
     
  • Optional rack mount
     
  • Optional hand held command pot. in 2x3x5 Aluminum box

Standard 8551-2 Amplifier
  • Unit available in NEMA 12 enclosure 12" x 8" x 4" (remote mounting)·  Power Input 115/230 volt, 60 Hz, 1 Ph·  Signal Input 0-10VDC  Optional 4-20ma or 0-5Vdc· Amphenol Plugs for control, actuator & power (Mating connection included)Inter-Connecting Cables8553 Actuator to Amplifier· Mating Amphenol connectors - 4 ft of cable

8550 Throttle Actuator Console Panel
  • Position and load meters with local/remote control (In place of rack mounting kit)

Accessories

  • THSTD31 Stand Assembly For SP31  - Adjustable Height 36" to 48" With variable arm - Cable to engine -60"long, 10-32THD
     
  • TSTD80 Stand Assembly For SP80  - Adjustable Height 36" to 48" With variable arm - Cable to engine -60"long, 5/16-24THD

     
  • This Product Can Be Modified For Production And Laboratory Use.
- 19" rack mounted amplifier and controls
- Remote and local actuator controls on the actuator
- Remote, adjustable angle settings
- Remote, resettable overload time constant
- Variable torque remote set of torque
- Extended angular position range 120, 210 degrees
- Rack and gear for linear positioning.

Contact Application Engineering for more information about our standard and  heavy duty actuators today!
Sales:
(269) 639-7229 ext 285
Email Us »
  • Automated Docking Station

    Automated Docking Station for heavier engine testing. Learn more »
  • Portable Fuel System

    Large Vehicle Fuel Usage Analysis. Learn more »
  • Table Top Engine Dynamometer

    Low inertia dynamometer for engines less than 5 HP.  Speed 0 – 12,000 rpm. Toque 0 – 6.5 N•m Learn more »